Extrusion Line For FEP,FPA,ETFE Production, Imported Converter+PLC
Touch Screen Control
Cable extruder is mainly used for building wires, automobile wires,
home appliances wires, communication cables and other cable
sections, but also for the production of power lines, insulation
sheath, power cables, multi-core cables, elevator cables and so on.
The equipment is also called wire extruder, wire extruder and cable
extruder. The cable extruder is mainly composed of extrusion
system, transmission system and heating and cooling system.
1. Our extruder adopts high-tech design, which ensures high quality
and high efficiency of products.
2. Our company's wire extruder can produce power cables with high
strength, high temperature resistance, aging resistance, chemical
corrosion resistance, good insulation performance and flame
3. The cable extruder adopts the latest technology, which not only
ensures the high extrusion capacity and 100% plasticization of the
cable, but also ensures the high gloss of the finished cable.
4. Imported electrical appliances are adopted, which have stable
operation and long service life.
5. The whole extruder has optional Chinese man-machine interface,
realizing intelligent control and simple operation.
6. Japanese RKC temperature controller is adopted to improve the
7. The gear box of the cable extruder of our company has the
characteristics of wear resistance and noise resistance after high
cycle hardening and fine grinding treatment.
1. According to the needs of customers, we can provide a variety of
wire extruders with different volumes or quantities to process a
variety of materials.
2. Our company can design customized cable extruder according to
the specific requirements of customers. Once the customized cable
extruder is completed, we will strictly test it.
One. There are five kinds of extruders: high speed single screw
extruder, plastic extruder, co rotating twin screw extruder and
conical twin screw extruder.
2. According to its function, it can be divided into continuous
extruder and discontinuous extruder.
Matters needing attention
One. The cable extruder shall be operated in the forward direction
rather than in the reverse direction.
2. The wire extruder can only operate when feeding. This can avoid
Three. Iron and other impurities are not allowed to enter the feed
port and exhaust port, so as to avoid accidents and impact on
Four. When the cable extruder is running, do not touch the feeding
port, discharging port, belt, gear and other rotating parts.
5. Before using wire extruder or wire extruder, inject lubricating
oil to avoid damaging the machine.
1. Barrel and screw used by this high speed building wire extrusion
line are from Taiwan well-known brand.
2. Different extrusion materials, such as PVC, PE, LSNH, Teflon,
nylon, etc. require different kinds of barrels and screws.
3. Operation plate of main control box is designed with
human-computer interface & traditional button switch.
4. This building cable extrusion line uses Mitsubishi PLC control.
5. The high speed building wire extrusion line is also equipped
with Mitsubishi transducer, Japanese PKC series temp-controller
& solidity relay (SSR) and hopper dryer from Taiwan brand.
|Type||L/D Ratio||Speed (rpm)||Extrusion Capacity (kg/hr)|