Concentric Type Copper Tape Screening Machine Amored Cable Equipment PB600
1.Application:
The unit is a 600mm diameter copper tape shielding unit, which is mainly used for laying copper tape on the outer layer of cable. The whole machine is operated by color touch screen, PLC unified coordinated control, sub motor drive design, wide range of pitch, advanced electronic control system, convenient operation and stable operation condition.
2.Main Component:
| 2.1 | Ø 2500mm portal pay-off | 1 set |
| 2.2 | Wire guide frame | 1 set |
| 2.3 | PB600 Concentric type copper tape screening machine | 1 set |
| 2.4 | Mechanical meter counter | 1 set |
| 2.5 | TQD1600 caterpillar | 1 set |
| 2.6 | Ø 2500mm portal take up and traverse line rack | 1 set |
| 2.7 | Electronic control system | 1 set |
| 2.8 | Safety protection device | 1set |
3. PB600 Concentric type copper tape screening machine
3.2.1. Maximum cable passing diameter: Ø 100mm
3.2.2. Applicable copper tape width: 16-60mm
3.2.3. Working principle: Concentric wrapping
3.2.4. Armor pitch: :infinitely adjustable
3.2.5. Quantity of tape storage: ≥5 discs
3.2.6. Reel diameter: Ø 600mm
3.2.7. Steel tape armoring machine speed range: 0-600rpm
3.2.8. Motor power: :7.5KW(AC)
3.2.9. Belt break stop: Electric control trigger
3.2.10. Equipment center height: 1000mm
3.2.11. The copper tape head is a plane concentric winding structure, driven by a motor, stepless speed change, and stepless adjustment of the pitch range.
3.2.12. The unwinding tension is controlled by a hysteresis tensioner, and the tension value is input through the touch screen, which is automatically controlled by the programmable controller PLC. The tension size can be adjusted without stopping, the tension output is constant, and the operation is convenient.
3.2.13. The copper tape head is equipped with a plane air brake. The whole braking process of the whole machine is completed by the motor inverter, the air pressure braking system, the braking resistor, etc. through the overall coordinated control of the PLC. The whole machine is braked consistently, effectively avoiding inertia Rotate, tear the strip.
3.2.14. Stopping when the belt is broken: when the belt is broken and the copper belt is used up, the whole machine can automatically stop and brake, and prompt on the touch screen.
5.Main parts brand:
| 5.1 | Bearing brand | (HRB.WZS.LYC) |
| 5.2 | Low voltage appliance brand | (CHINT) |
| 5.3 | Brand of pneumatic component | (AIRTAC) |
| 5.4 | Brand of main drive motor | (JIANGHUAI) |
| 5.5 | Take-up motor brand | (JIANGHUAI)) |
| 5.6 | Frequency conversion controller | (INOVANCE/SINEE |
| 5.7 | PLC&Touch screen | (SIEMENS) |
6. Dument with machine
| 6.1 | Use Manual | 1 set |
| 6.2 | Foundation diagram | 1 set |
| 6.3 | Overall diagram | 1 set |
| 6.4 | Electrical drawing | 1 set |
| 6.5 | Air circuit layout | 1set |
Product Tags:
|
|
Concentric Type Armored Cable Taping Machine / Equipment Images
|
